Tri-power Digital Electrosurgery (Electron) Unit 110V with 7 Electordes dental unit 50 WATTS

Description

Electrosurgery is based on the use of a high-frequency current that passes through the tissue, producing localized heat, to achieve the desired effect (cutting and/or coagulation).
An electrosurgical generator (ESG) is an instrument that generates high frequency waves (500,000 to 2,500,000 c/s) and, like all electrical applications, requires a closed circuit for current flow. In this circuit, current flows from the active electrode, through the patient and back to the generator through the return electrode (passive electrode or ground pole).

Electrosurgery model 3G-TRIPOWER Digital for minor procedures, dermatology and dentistry.
3 operating modes, cutting/cutting and coagulation/coagulation
4 Types of (CUT) Pure cutting (CUT), (CUT1 – CUT2) cutting and coagulation and (COAG)
pure coagulation.
High-performance LSI microchip card.
More compact and lighter, lower power consumption and safer.

Cut
This type of wave produces large amounts of heat per second in the tissues, rapidly raising the temperature of the water contained in them to the point of boiling and evaporation (generates dehydration).
cellular and causes the incision.
CUT 1
Cut and Coagulation 1
When a cut is made in the tissue and at the same time a medium coagulation associated with the cut is carried out.
Cut and Coagulation 2
When cutting or incision is required and greater coagulation associated with the cut.
CUT 2
Coagulation
A special modulated current is produced to generate coagulation
COAG
superficial.

Reference

Maximum CUT cutting power
50W – 400S
Maximum cutting/coagulation power CUT/COAG1
45W – 400 2
Maximum cutting/coagulation power CUT/COAG2
40W – 400S
Maximum coagulation power COAG
40W – 400 2
Work frequency
600kHz
Selectable power input
115/230 Vac
feeding frequency
50-60Hz
Maximum absorption power
280VA
Dimensions (L-W-D)
190x85x239
Weight

Attention:
Radiofrequency should not be confused with electrosurgical machine (surgical diathermy), spark circuit unit (electrocautery), and uses a completely new technique compared to scalpel surgery and other techniques and radio energy makes cutting very light. The surgeon holds a very high frequency radio wave of 0-2-3 MHz and a thin needle or wire electrode, the radio energy passes between the cautery electrode and the patient’s plate.
It is concentrated at the end of the needle or wire loop electrode, which produces vapor within the vaporized and dividing cells.