SMILE DESIGNERS -Flowable Sygd-Ma Kit x ​​3

$100.00

Advantages -Variety of tones. -Formula of great resistance and excellent polishing. -Rapid polymerization, Light-curing in just 30 seconds for light tones and 40 seconds for dark tones. -Radiopaque. -Low Contraction. -Does not adhere to Teflon instruments

Add to cart

Smile Designers Visible Light Cure Dental Resin-Based NanoHybrid Dental Composite for veneers. Kit x 5

$250.00

Nano Hybrid-CHRO-MA Visible Light Cure Dental Resin Extra-White for veneers

Smile Design with High Aesthetic Nano-Hybrid Resin for veneers

The high aesthetic nano-hybrid resin Chro-Ma Kit x ​​5 Jga Light Cure Dental extra-White -4GR is an innovative and quality product offered by SMILE DESIGNERS. This resin features Nanofill technology, allowing you to create dental veneers with a natural and long-lasting appearance.

Properties and Benefits of High-Aesthetic Nano-Hybrid Resin

The high aesthetic nano-hybrid resin has several advantages that make it superior to other resins on the market:

• It has excellent manageability, strength, polish, and polymerization shrinkage, ensuring an optimal result and greater patient satisfaction.
• its have superior consistency due to its inorganic filler with a particle size of 0.01 to 0.05 microns, ideal for anterior and posterior restorations. This improves the physical properties and polish of the resin, as well as its adaptation to the dental surface besides extra-white color.
• And Its specially designed for high aesthetic procedures with its double chameleon effect, allowing you to reproduce the color, translucency, and shine of natural enamel.

How to Use High-Aesthetic Nano-Hybrid Resin

To use high aesthetic nano-hybrid resin, it is recommended to follow these steps:

1. Prepare the tooth with an acid etch and apply a dental adhesive.
2. Select the color of the resin that best matches the patient’s tooth shade.
3. Apply a thin layer of resin to the tooth and shape it with a spatula or brush.
4. Polymerize the resin with an LED lamp for 20 seconds per surface.
5. Repeat the process until the desired thickness and shape of the veneer are achieved.
6. Polish the veneer with abrasive discs and polishing pastes.

With high aesthetic nano-hybrid resin, you can offer your patients a personalized, natural, and long-lasting smile design.      INSTRUCIONS OF APPLICATION Bisg-ma Stabilizer  Photo Initiators  Instructions for use:  Cleaning: Since cleaning and etching may cause distinct changes in the natural color of the tooth the selection of the appropriate color should be done prior to cleaning and etching the tooth   Perform prophylaxis upon surface enamel to be etched, using water and pumice. You should use a prophylactic paste that contains no acid or fluorides. The soft portions of dentine and all decay should be removed. Isolate the tooth with a rubber dam or a roll of cotton. Put a protective base of zinc phosphate or calcium hydroxide.     Cavity preparation  Prepare the cavity to remove caries. If liners are required composite filling material is compatible with calcium hydroxide and zinc phosphate cement. Etch the enamel surface in the applied layer of bonding prior to the application of the composite.   Etching tooth surface enamel:  Apply etchant over the surface enamel of the tooth using a cotton pellet or brush. Allow remaining for 20-30 seconds. On primary tooth high in fluoride, 90-120 seconds. If a glass ionomer base is used to not etch for more than 20-30 seconds. A flush area completely for 20 seconds. Do not allow the patient to rinse the mouth or permit saliva to touch the etched enamel surface.  Air dry completely with an oil/ moisture-free air source. The surface of the tooth should have a dull, white, frosted appearance. If not, repeat the process allowing etchant to remain on the tooth for an additional 20-30 seconds.  Bonding Apply a thin uniform coating of bonding resin immediately onto the etched tooth surface. Thin the resin coating on the tooth with a gentle stream of oil/moisture-free air.  Avoid contact with gingival or other soft tissue.  Restoration Withdraw a suitable quantity of composite; apply the composite in layers of no more than 2mm thick. To thicken and cure the composite exposure to a visible light source, continue this procedure until desired thickness is obtained, ensure that each layer is cured separately, and expose the total restoration to a further 60 seconds of light. High-intensity light will require less time to cure the material so you should test to find the exposure time suitable for your type of light.  Finishing A smooth surface can be obtained by using strip aluminum oxide paper and disc ranging from coarse to super fine. You can polish using the conventional method for acrylics.   chroma syringe Smile Designers Bonding Composite Adhesive 6ml Etching Gel syringe phosphoric-acid-dental

Add to cart

SMILE DESIGNERS -Micro-Hybrid Tegd-Ma Kit x ​​5 Jga -4GR

$200,000.00

Light-curing resin for dental restorations, with an approximate weight of 76% (60% volume), inorganic filler with a particle size of 0.7 microns, it is ideal for anterior and posterior restorations, due to its high gloss and aesthetic properties. are preferred by dentists in the United States.

Add to cart

SMILE DESIGNERS -Nano-Hybrid Bisgd-Ma Kit x ​​5 Jga -4GR

$200.00

High quality Nanohybrid photocuring resin. micro-fill formula Ideal handling during placement. Excellent polishing properties, aesthetics and perfect shine. Superior consistency due to its inorganic filler with a particle size of 0.01 to 0.05 microns, ideal for anterior and posterior restorations.

Add to cart

Chemical Self Cure Composite Kit 15gm/15gm & Bonding Chipped Tooth Repair for Cracked or Broken Teeth USA Smile Designer

$31.00

Chemical Self Cure Composite Kit 15gm/15gm & Bonding Chipped Tooth Repair for Cracked or Broken Teeth USA Smile Designer

Add to cart

Self Cure Composite Repair Kit for Cracked or Chip tooth Kit Jars 15gm/15gm SMILE DESIGNERS®

$31.45

Composite Chemical Self Cure

itm/283641701390,/itm/143802777321

 Kit 15gm/15gmWith Bonding and Pads    A highly filled, non-sticky, self curing, hybrid, anterior/posterior composite filling material. It is a convenient universal shade, paste/paste system.   The restorative has high strength (270 MPz compressive) with low water sorption and solubility.   The material can be condensed into the cavity preparation up to the enamel/dentinal joint as a base layer or be filled to the cavo-surface margin for a complete self cure composite restoration. Quick setting eliminates time spent with incremental placement of light cure materials.   Includes

• 15 gm. Catalyst Paste
• 15 gm. Base Paste
• 3 ml. Catalyst Bonding Resin
• 3 ml. Base Bonding Resin
• 7.5 ml. Etchant
• Mixing Pads
• Spatulas
• Instructions

Add to cart

Smile Designers Nano Hybrid BISG-MA Composite 4gm Dental Composite

$37.99 – $52.99

Instructions for use:    Cleaning:   Since cleaning and etching may cause distinct changes in the natural color of the tooth the selection of the appropriate color should be done before cleaning and etching the tooth   Perform prophylaxis upon surface enamel to be etched, using water and pumice. You should use a prophylactic paste that contains no acid or fluorides. The soft portions of dentine and all decay should be removed. Isolate the tooth with a rubber dam or a roll of cotton. Put a protective base of zinc phosphate or calcium hydroxide.     Cavity preparation    Prepare the cavity to remove caries. If liners are required composite filling material is compatible with calcium hydroxide and zinc phosphate cement. Etch the enamel surface in the applied layer of bonding before the application of the composite.     Etching tooth surface enamel:    Apply etchant over the tooth's surface enamel using a cotton pellet or brush. Allow remaining for 20-30 seconds. On primary tooth high in fluoride, 90-120 seconds. If a glass ionomer base is used do not etch for more than 20-30 seconds. A flush area completely for 20 seconds. Do not allow the patient to rinse the mouth or permit saliva to touch the etched enamel surface.    Air dry completely with an oil/ moisture-free air source. The surface of the tooth should have a dull, white, frosted appearance. If not, repeat the process allowing the etchant to remain on the tooth for an additional 20-30 seconds.    Bonding   Apply a thin uniform coating of bonding resin immediately onto the etched tooth surface. Then the resin coating on the tooth with a gentle stream of oil/moisture-free air.  Avoid contact with gingival or other soft tissue.    Restoration   Withdraw a suitable quantity of composite; apply the composite in layers of no more than 2mm thick. To thicken and cure the composite exposure to a visible light source, continue this procedure until desired thickness is obtained, ensure that each layer is cured separately, and expose the total restoration to a further 60 seconds of light. High-intensity light will require less time to cure the material so you should test to find the exposure time suitable for your type of light.    Finishing   A smooth surface can be obtained by using strip aluminum oxide paper and disc ranging from coarse to super fine. You can polish using the conventional method for acrylics.    Precaution   The etching solution contains a 37% phosphoric acid solution, which can be harmful to the skin and eyes. In case of contact, rinse the eyes or skin immediately in plenty of water and seek medical assistance for appropriate treatment.    Warning  -Do not leave at the reach of children In case of any change in the original function of the product, stop using it and contact the manufacturer.    For professional dental use only. 

Select options

Smile Designers Flowable SYGD-MA Composite 2Gm

$22.99 $16.99

Smile Flowable SYGD-MA LightCure Restorative Composite 

 

Intention of Use: 

Aesthetic restorations of superficial and little cavities.   

Composition: 

  Crystalline and fumed silicon dioxide  Bisg-ma   

Instructions of use:  

Follow usual procedures for tooth preparation. Exposed dentin must be protected by a calcium hydroxide preparation. Glass ionomer or another suitable base can be used to over the preparation. Remove temporary restorations. Isolate and clean the tooth of any traces of temporary cement.   

Etching Tooth Surface Enamel 

Apply etchant over the surface enamel of the tooth using a cotton pellet or brush. Allow it to remain for 20-30 seconds. On primary tooth high in fluoride, a 90-120 seconds. If glass ionomer base is used do not etch for more than 20-30 seconds. Flush the area completely for 20 seconds. Do not allow patients to rinse the mouth or permit saliva to touch etched enamel surfaces. Air dry completely with an oil/moisture-free air source. The surface of the tooth should have a dull, frosted appearance. If not, repeat the process allowing etchant to remain on the tooth an additional 20-30 seconds.  

Priming tooth surface 

Apply a thin uniform coating of enamel bonding resin immediately onto etched tooth surface. Thin the resin coating on the tooth with a gentle stream of oil/moisture-free air. Avoid contact with gingival or other soft tissue. When using a primer, apply a layer of porcelain primer on the etched porcelain as usual.   

Restoration 

Apply into the prepared cavity layer of 1mm thin of flowable composite and polymize with a visible light source for 30 seconds. If a thicker layer is necessary proceed by layers of 1 mm and polymerise each one for 30 seconds until the cavity is full then apply a thin layer of bond and polymerize for 20 seconds. Then finish and polish as usual.   

Storage and Use 

This system is designed to be used at room temperature of approximately 18-24 C or 65-74F. Shelf life at room temperature is three years when syringe and vial caps are replaced immediately after dispensing. Unopened kits can be refrigerated to 39.2F or 4 C to extend shelf life, if stored in the refrigerator, bring back to room temperature prior to use. 

Select options

Smile Designers Micro-Hybrid TEGD-MA Dental Restoration Composite

$24.99 $16.99

Smile MicroHybrid TEGD-MA Light Cure Restorative Composite for Anterior and Posterior Use The Intention of use:   High aesthetic restorations filling teeth cavities  Compositions:  Crystalline and Fumed Silicon dioxide  Bisg-ma Stabilizer  Photo Initiators  Instructions for use:  Cleaning:   Since cleaning and etching may cause distinct changes in the natural color of the tooth the selection of the appropriate color should be done prior to cleaning and etching the tooth Perform prophylaxis upon surface enamel to be etched, using water and pumice. You should use a prophylactic paste that contains no acid or fluorides. The soft portions of dentine and all decay should be removed. Isolate the tooth with a rubber dam or a roll of cotton. Put a protective base of zinc phosphate or calcium hydroxide.     Cavity preparation  Prepare the cavity to remove caries. If liners are required composite filling material is compatible with calcium hydroxide and zinc phosphate cement. Etch the enamel surface in the applied layer of bonding prior to the application of the composite.     Etching tooth surface enamel:  Apply etchant over the surface enamel of the tooth using a cotton pellet or brush. Allow remaining for 20-30 seconds. On primary tooth high in fluoride, 90-120 seconds. If a glass ionomer base is used to not etch for more than 20-30 seconds. A flush area completely for 20 seconds. Do not allow the patient to rinse the mouth or permit saliva to touch the etched enamel surface.  Air dry completely with an oil/ moisture-free air source. The surface of the tooth should have a dull, white, frosted appearance. If not, repeat the process allowing etchant to remain on the tooth for an additional 20-30 seconds.  Bonding Apply a thin uniform coating of bonding resin immediately onto the etched tooth surface. Thin the resin coating on the tooth with a gentle stream of oil/moisture-free air.  Avoid contact with gingival or other soft tissue.    Restoration Withdraw a suitable quantity of composite; apply the composite in layers of no more than 2mm thick. To thicken and cure the composite exposure to a visible light source, continue this procedure until desired thickness is obtained, ensure that each layer is cured separately, and expose the total restoration to a further 60 seconds of light. High-intensity light will require less time to cure the material so you should test to find the exposure time suitable for your type of light.    Finishing A smooth surface can be obtained by using strip aluminum oxide paper and disc ranging from coarse to super fine. You can polish using the conventional method for acrylics.  Precaution The etching solution contains a 37% phosphoric acid solution, which can be harmful to skin and eyes. In case of contact, rinse the eyes or skin immediately in plenty of water and seek medical assistance for appropriate treatment. 

Select options