SMILE DESIGNERS -Flowable Sygd-Ma Kit x ​​3

Call for Price

Advantages -Variety of tones. -Formula of great resistance and excellent polishing. -Rapid polymerization, Light-curing in just 30 seconds for light tones and 40 seconds for dark tones. -Radiopaque. -Low Contraction. -Does not adhere to Teflon instruments

Read more

Smile Designers Visible Light Cure Dental Resin-Based NanoHybrid Dental Composite for veneers. Kit x 5

Call for Price

Nano Hybrid-CHRO-MA Visible Light Cure Dental Resin Extra-White for veneers

Smile Design with High Aesthetic Nano-Hybrid Resin for veneers

The high aesthetic nano-hybrid resin Chro-Ma Kit x ​​5 Jga Light Cure Dental extra-White -4GR is an innovative and quality product offered by SMILE DESIGNERS. This resin features Nanofill technology, allowing you to create dental veneers with a natural and long-lasting appearance.

Properties and Benefits of High-Aesthetic Nano-Hybrid Resin

The high aesthetic nano-hybrid resin has several advantages that make it superior to other resins on the market:

• It has excellent manageability, strength, polish, and polymerization shrinkage, ensuring an optimal result and greater patient satisfaction.
• its have superior consistency due to its inorganic filler with a particle size of 0.01 to 0.05 microns, ideal for anterior and posterior restorations. This improves the physical properties and polish of the resin, as well as its adaptation to the dental surface besides extra-white color.
• And Its specially designed for high aesthetic procedures with its double chameleon effect, allowing you to reproduce the color, translucency, and shine of natural enamel.

How to Use High-Aesthetic Nano-Hybrid Resin

To use high aesthetic nano-hybrid resin, it is recommended to follow these steps:

1. Prepare the tooth with an acid etch and apply a dental adhesive.
2. Select the color of the resin that best matches the patient’s tooth shade.
3. Apply a thin layer of resin to the tooth and shape it with a spatula or brush.
4. Polymerize the resin with an LED lamp for 20 seconds per surface.
5. Repeat the process until the desired thickness and shape of the veneer are achieved.
6. Polish the veneer with abrasive discs and polishing pastes.

With high aesthetic nano-hybrid resin, you can offer your patients a personalized, natural, and long-lasting smile design.      INSTRUCIONS OF APPLICATION Bisg-ma Stabilizer  Photo Initiators  Instructions for use:  Cleaning: Since cleaning and etching may cause distinct changes in the natural color of the tooth the selection of the appropriate color should be done prior to cleaning and etching the tooth   Perform prophylaxis upon surface enamel to be etched, using water and pumice. You should use a prophylactic paste that contains no acid or fluorides. The soft portions of dentine and all decay should be removed. Isolate the tooth with a rubber dam or a roll of cotton. Put a protective base of zinc phosphate or calcium hydroxide.     Cavity preparation  Prepare the cavity to remove caries. If liners are required composite filling material is compatible with calcium hydroxide and zinc phosphate cement. Etch the enamel surface in the applied layer of bonding prior to the application of the composite.   Etching tooth surface enamel:  Apply etchant over the surface enamel of the tooth using a cotton pellet or brush. Allow remaining for 20-30 seconds. On primary tooth high in fluoride, 90-120 seconds. If a glass ionomer base is used to not etch for more than 20-30 seconds. A flush area completely for 20 seconds. Do not allow the patient to rinse the mouth or permit saliva to touch the etched enamel surface.  Air dry completely with an oil/ moisture-free air source. The surface of the tooth should have a dull, white, frosted appearance. If not, repeat the process allowing etchant to remain on the tooth for an additional 20-30 seconds.  Bonding Apply a thin uniform coating of bonding resin immediately onto the etched tooth surface. Thin the resin coating on the tooth with a gentle stream of oil/moisture-free air.  Avoid contact with gingival or other soft tissue.  Restoration Withdraw a suitable quantity of composite; apply the composite in layers of no more than 2mm thick. To thicken and cure the composite exposure to a visible light source, continue this procedure until desired thickness is obtained, ensure that each layer is cured separately, and expose the total restoration to a further 60 seconds of light. High-intensity light will require less time to cure the material so you should test to find the exposure time suitable for your type of light.  Finishing A smooth surface can be obtained by using strip aluminum oxide paper and disc ranging from coarse to super fine. You can polish using the conventional method for acrylics.   chroma syringe Smile Designers Bonding Composite Adhesive 6ml Etching Gel syringe phosphoric-acid-dental

Read more

SMILE DESIGNERS -Micro-Hybrid Tegd-Ma Kit x ​​5 Jga -4GR

Call for Price

Light-curing resin for dental restorations, with an approximate weight of 76% (60% volume), inorganic filler with a particle size of 0.7 microns, it is ideal for anterior and posterior restorations, due to its high gloss and aesthetic properties. are preferred by dentists in the United States.

Read more

SMILE DESIGNERS -Nano-Hybrid Bisgd-Ma Kit x ​​5 Jga -4GR

Call for Price

High quality Nanohybrid photocuring resin. micro-fill formula Ideal handling during placement. Excellent polishing properties, aesthetics and perfect shine. Superior consistency due to its inorganic filler with a particle size of 0.01 to 0.05 microns, ideal for anterior and posterior restorations.

Read more

Smile Designers LC Orthobond Resin Adhesive Kit New Presentation

Call for Price

Manufacturer Code: 012-024

Brand: Smile Designers LC Ortho Bond

Component: Adhesive, primer, etch

Cure: Light-cure

Packaging: 2 x 5 gr paste, 7 ml primer, 7 ml etch

The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping the item

Read more

Chemical Self Cure Composite Kit 15gm/15gm & Bonding Chipped Tooth Repair for Cracked or Broken Teeth USA Smile Designer

Call for Price

Chemical Self Cure Composite Kit 15gm/15gm & Bonding Chipped Tooth Repair for Cracked or Broken Teeth USA Smile Designer

Read more

Self Cure Composite Repair Kit for Cracked or Chip tooth Kit Jars 15gm/15gm SMILE DESIGNERS®

Call for Price

Composite Chemical Self Cure

itm/283641701390,/itm/143802777321

 Kit 15gm/15gmWith Bonding and Pads    A highly filled, non-sticky, self curing, hybrid, anterior/posterior composite filling material. It is a convenient universal shade, paste/paste system.   The restorative has high strength (270 MPz compressive) with low water sorption and solubility.   The material can be condensed into the cavity preparation up to the enamel/dentinal joint as a base layer or be filled to the cavo-surface margin for a complete self cure composite restoration. Quick setting eliminates time spent with incremental placement of light cure materials.   Includes

• 15 gm. Catalyst Paste
• 15 gm. Base Paste
• 3 ml. Catalyst Bonding Resin
• 3 ml. Base Bonding Resin
• 7.5 ml. Etchant
• Mixing Pads
• Spatulas
• Instructions

Read more

Smile Designers Auto-Bond 7th Generation Composite Adhesive 6ml

Call for Price

INSTRUCTIONS FOR USE: 1. A clean and dry operating area must be ensured. Ideally, a rubber dam should be used. 2. In very deep cavities, areas near the pulp should be selectively lined with a calcium hydroxide liner and subsequently pressure coated with strong cement (type II glass ionomer cement liner). 3. Apply a thick coat of Smile Designers 7th Generation Adhesive to the surface for at least at least 30 seconds All cavity surfaces must be completely coated. The total reaction time should not be less than 30 seconds. 4. Disperse excess Smile Designers Seventh Generation Self-Etch Adhesive with air until there is no longer any movement of the material 5. Cure Smile Designers 7th Generation Adhesive for 10 seconds at a light intensity of more than 500 mW/cm2  

Read more

PRIME DENT Light Cure Orthodontic Resin Adhesive Ortho Bond Paste

Call for Price

Product Description

Description: Light cure orthodontic resin kit, for bonding plastic, metal, or porcelain orthodontic brackets to etched enamel. No mixing is required. Flows well and eliminates bracket flotation. The primer also helps to seal the etched enamel. The cohesive strength of the adhesive is stronger than the bond to the tooth, allowing for one-piece removal after orthodontic treatment with no enamel scarring. Kit of 2 x 5 gr paste syringe, 7 ml primer, 7 ml etch.

Manufacturer Code: 012-024

Brand: Prime-Dent LC Ortho Bond

Component: Adhesive, primer, etch

Cure: Light-cure

Packaging: 2 x 5 gr paste, 7 ml primer, 7 ml etch

The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping the item

Read more

Smile Designers Nano Hybrid BISG-MA Composite 4gm Dental Composite

Call for Price

Instructions for use:    Cleaning:   Since cleaning and etching may cause distinct changes in the natural color of the tooth the selection of the appropriate color should be done before cleaning and etching the tooth   Perform prophylaxis upon surface enamel to be etched, using water and pumice. You should use a prophylactic paste that contains no acid or fluorides. The soft portions of dentine and all decay should be removed. Isolate the tooth with a rubber dam or a roll of cotton. Put a protective base of zinc phosphate or calcium hydroxide.     Cavity preparation    Prepare the cavity to remove caries. If liners are required composite filling material is compatible with calcium hydroxide and zinc phosphate cement. Etch the enamel surface in the applied layer of bonding before the application of the composite.     Etching tooth surface enamel:    Apply etchant over the tooth's surface enamel using a cotton pellet or brush. Allow remaining for 20-30 seconds. On primary tooth high in fluoride, 90-120 seconds. If a glass ionomer base is used do not etch for more than 20-30 seconds. A flush area completely for 20 seconds. Do not allow the patient to rinse the mouth or permit saliva to touch the etched enamel surface.    Air dry completely with an oil/ moisture-free air source. The surface of the tooth should have a dull, white, frosted appearance. If not, repeat the process allowing the etchant to remain on the tooth for an additional 20-30 seconds.    Bonding   Apply a thin uniform coating of bonding resin immediately onto the etched tooth surface. Then the resin coating on the tooth with a gentle stream of oil/moisture-free air.  Avoid contact with gingival or other soft tissue.    Restoration   Withdraw a suitable quantity of composite; apply the composite in layers of no more than 2mm thick. To thicken and cure the composite exposure to a visible light source, continue this procedure until desired thickness is obtained, ensure that each layer is cured separately, and expose the total restoration to a further 60 seconds of light. High-intensity light will require less time to cure the material so you should test to find the exposure time suitable for your type of light.    Finishing   A smooth surface can be obtained by using strip aluminum oxide paper and disc ranging from coarse to super fine. You can polish using the conventional method for acrylics.    Precaution   The etching solution contains a 37% phosphoric acid solution, which can be harmful to the skin and eyes. In case of contact, rinse the eyes or skin immediately in plenty of water and seek medical assistance for appropriate treatment.    Warning  -Do not leave at the reach of children In case of any change in the original function of the product, stop using it and contact the manufacturer.    For professional dental use only. 

Read more

Smile Designers Glass Ionomer Restorative Type 2

Call for Price

Glass Ionomer Restorative Material Type II

 

Intention Of Use: 

  Restorative of deciduous teeth, class III & V and cervical erosions long-term temporary restorative Class I and II .   

Composition 

  Alumino-silicated Glass  Polyacrylic acid  Varnish   

Instructions of use: 

  Powder and liquid dispensing 

1. The standard powder to liquid ratio is 0.85g the powder and 0.45g the liquid 
2. For accurate dispensing of powder, lightly tap the bottle against the hand. Do not shake or invert 
3. c) Hold the liquid bottle vertically and squeeze gently 
4. Close bottles immediately after use. 

 

Mixing

  Dispense powder and liquid onto the pad. Using the plastic spatula, divide the powder into 2 equal parts. Mix the portion with all of the liquid for 10 seconds. Incorporate the remaining portion and mix the whole thoroughly for 15-20 seconds (total time within 30 seconds)   

Product Placement 

  Place the mixture in the prepared cavity (the cavity has to be dry and clean.) When all the restoration is met, let the product lose his brightness then put your finger over the restoration phishing inside the cavity for one or two minutes. When 6 minutes elapsed, cover the restoration with a layer of varnish. The varnish avoids water absorption of the product. The product needs at least 24hrs., to meet the maximum strength.    Storage  Store at temperature of 39.2-77.0F 

Read more

Smile Designers Glass Ionomer Lutting Type 1

Call for Price

SMILED DESIGNERS  GLASS IONOMER LUTTING TYPE 1 

 

KIT CONTENTS: 

Powder 20g Liquid 15ml Mixing Pad Measuring Scoop IFU   Glass Ionomer Cement  Type 1  Lutting 

Intention Of Use: 

Cementation in inlays, onlays, crowns and bridges made from any kind of material used for operatory and prosthetic dentistry.

Composition: 

Alumino-Silicatred Glass Polycrylic Acid  

Powder and Liquid Dispensing:

1. The standard powder to liquid ratio is 0.85g the powder and 0.45g the liquid 
2. For accurate dispensing of powder, lightly tap the bottle against the hand. Do not shake or invert. 
3. Hold the liquid bottle vertically and squeeze gently
4. Close bottles immediately after use. 

Mixing Dispense powder and liquid onto the pad. Using the plastic spatula, divide the powder into 2 equal parts. Mix the first portion with all of the liquid for 10 seconds. Incorporate the remaining portion and mix the whole thoroughly for 15-20 seconds. (Total time within 30 seconds) 

 

Storage: 

Store at temperature of 39.2-77.0F 

Read more